④上代码

核心代码3大块：

1. 微信中获取随申码
2. 钉钉中登记并上传截图
3. 钉钉换成哓黑板

   import win32gui
   import win32con
   import win32api
   import time
   import pyautogui
   import pyperclip
   import logging
   import shelve
   from ConfigData import ConfigData as cd
   """
   本程序主要实现3个功能：
   ①登陆微信，找到随申办小程序，然后获得包括本人和亲属的随申码，并保存成jpg文件
   ②登陆钉钉，找到相应的组织机构，根据要求提交每日健康申报
   ③登陆晓黑板，根据班级要求，提交每日健康申报
   本程序主要通过pywin32和pyautogui对应用的窗口进行定位，使用了图片比对和像素定位
   两种方式，目前版本[v1.0]不支持文字识别。
   主要存在的限制：
   ①必须安装微信、钉钉和晓黑板的PC客户端版本
   ②在微信中，必须先安装'随申办'小程序, 并注册用户；然后将亲属随申码都申请好
   ③在配置参数中：
   - familyList这个参数的名单：亲属顺序根据微信’随申码‘的顺序，本人(微信登录用户)在最后,根据钉钉的设置，最多5个人
   ④由于暂不支持文字识别，所以在定位控件的时候都是采用pyautogui的图片比较，在图片比较失效的情况下，采用默认定位位置，
   因此，如果需要更换一些参数，比如省-市-区，比如钉钉的组织的话，需要的操作如下：
   A) 钉钉的组织修改：
   方法A： 先登录钉钉，并将默认组织修改为小孩所在的班级
   方法B： 登录钉钉，将小孩所在的班级的图片截图下来，并命名为dd_org.png和dd_orgselected.png放在img文件夹下
   B) 钉钉日报提交的省-市-区的修改
   方法A： 登录钉钉，手工提交一次，以后钉钉会默认记住
   方法B： 登录钉钉，将自己所在的省市区截图，然后命名为
   Sheng.png和Sheng_selected.png
   Shi.png和Shi_selected.png
   Qu.png和Qu_selected.png
   已知BUG：
   ①在钉钉和晓黑板打开文件的对话框的时候，需要事先手工打开一次，把文件夹定位到本目录，确保寻找随申码文件不会失效
   *后续版本会考虑去除这个BUG
   ②微信如果打开的时候为扫码登录的话，应用可能会报错，但是只要扫码登录了，应用将继续正常运行
   """
   __author__ = 'Ryle[ryle@liu.group]'
   __version__ = 'v1.0'
   # 日志
   def getLogger(basicLogFileName, logFileName, logLevel=logging.DEBUG, logMode=1):
   # 日志格式
   logFormat = logging.Formatter('%(asctime)s - %(pathname)s[line:%(lineno)d] - %(levelname)s: %(message)s')
   # 定义日志
   logging.basicConfig(filename=basicLogFileName,
   format='%(asctime)s - %(pathname)s[line:%(lineno)d] - %(levelname)s: %(message)s',
   level=logLevel)
   logger = logging.getLogger(__name__)
   logger.setLevel(level=logLevel)
   if logMode == 0:
   ch = logging.StreamHandler()
   ch.setLevel(logLevel)
   ch.setFormatter(logFormat)
   logger.addHandler(ch)
   elif logMode == 1:
   fh = logging.FileHandler(logFileName)
   fh.setLevel(logLevel)
   fh.setFormatter(logFormat)
   logger.addHandler(fh)
   else:
   ch = logging.StreamHandler()
   ch.setLevel(logLevel)
   ch.setFormatter(logFormat)
   logger.addHandler(ch)
   fh = logging.FileHandler(logFileName)
   fh.setLevel(logLevel)
   fh.setFormatter(logFormat)
   logger.addHandler(fh)
   return logger
   #获得保存的密码
   def getPassword(key):
   db = shelve.open(cd.passwordFile)
   retValue = db[key]
   db.close()
   return retValue
   # 把指定的窗口移动到新的位置，一般是0,0
   def moveWindow(window, newLeft, newTop):
   win32gui.ShowWindow(window, win32con.SW_SHOWNORMAL)
   # 把窗口激活
   win32gui.SetForegroundWindow(window)
   left, top, right, bottom = win32gui.GetWindowRect(window)
   # 把窗口移动到（0，0）
   win32gui.MoveWindow(window, cd.left, cd.top, abs(right-left), abs(bottom-top), cd.repaint)
   time.sleep(cd.generalWaitTime)
   # 启动应用程序
   def startApp(appName):
   logger.info("启动应用程序：{}".format(appName))
   win32api.ShellExecute(0, 'open', appName, '', '', 1)
   # 微信登录
   def wxLogin():
   # 定位微信login窗口，并点击登录
   target_x, target_y = getClickPosition(cd.wxLoginBtnPic, cd.wxLoginBtn_x, cd.wxLoginBtn_y)
   logger.debug("微信登录窗口位置：{}/{}".format(target_x, target_y))
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 显示登录窗口并等待手机微信确认登录
   wxWindow = win32gui.FindWindow(cd.wxWindowClass, cd.wxWindowName)
   while wxWindow == 0:
   time.sleep(cd.generalWaitTime_speed_high)    #  每隔0.2秒确认一下是否手机已经认登录
   wxWindow = win32gui.FindWindow(cd.wxWindowClass, cd.wxWindowName)
   logger.debug("返回微信主窗口句柄：{}".format(wxWindow))
   return wxWindow
   # 钉钉登录
   def ddLogin():
   # 定位钉钉Login窗口，并点击密码登录，
   target_x, target_y = getClickPosition(cd.ddPasswordLoginPic, cd.ddPasswordLogin_x, cd.ddPasswordLogin_y)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 显示密码登录窗口，可以输入手机号和密码（手机国别选择暂时不支持）
   # 手机号
   target_x, target_y = getClickPosition(cd.ddInputPhoneNumber, cd.ddInputPhoneNumber_x, cd.ddInputPhoneNumber_y)
   pyautogui.click(target_x, target_y)
   for i in range(30):
   pyautogui.press('backspace')
   pyautogui.write(cd.ddLoginPhone)
   time.sleep(cd.generalWaitTime)
   # 密码
   target_x, target_y = getClickPosition(cd.ddInputPassword, cd.ddInputPassword_x, cd.ddInputPassword_y)
   pyautogui.click(target_x, target_y)
   for i in range(30):
   pyautogui.press('backspace')
   pyautogui.write(getPassword('dingding'))
   time.sleep(cd.generalWaitTime)
   # 点击登录按钮
   target_x, target_y = getClickPosition(cd.ddLoginBtn, cd.ddLoginBtn_x, cd.ddLoginBtn_y)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime * cd.generalTimeAdjust)
   ddMainWindow = win32gui.FindWindow(cd.ddWindowClass, cd.ddWindowName)
   logger.debug("钉钉主窗口句柄：{}".format(ddMainWindow))
   return ddMainWindow
   # 晓黑板登录
   def xhbLogin():
   # 如果登录模式不是账号登录，就切换到账号登录
   loginMode = pyautogui.locateOnScreen('img/xiaoheiban/xhb_login_mode.png')
   if loginMode == None:
   target_x, target_y = getClickPosition('img/xiaoheiban/xhb_login_mode_unselected.png', 273, 436)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   target_x, target_y = getClickPosition('img/xiaoheiban/xhb_username.png', 80, 177)
   pyautogui.click(target_x, target_y)
   pyautogui.hotkey('ctrl', 'a')
   pyautogui.press('delete')
   pyautogui.write(cd.xhbLoginPhone)
   target_x, target_y = getClickPosition('img/xiaoheiban/xhb_password.png', 80, 232)
   pyautogui.click(target_x, target_y)
   pyautogui.hotkey('ctrl', 'a')
   pyautogui.press('delete')
   pyautogui.write(getPassword('xiaoheiban'))
   target_x, target_y = getClickPosition('img/xiaoheiban/xhb_login.png', 180, 316)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime * cd.generalTimeAdjust)
   xhbMainWindow = win32gui.FindWindow(cd.xhbMainWindowClass, cd.xhbMainWindowName)
   logger.debug("晓黑板主窗口句柄：{}".format(xhbMainWindow))
   return xhbMainWindow
   # 根据不同的应用启动应用程序
   def getAppStart(appName, mainWndClassName, mainWndName):
   '''
   通过参数appName，mainWndClassName和mainWndName，判断相应的应用是否已经启动:
   ①如果已经启动，直接返回该应用的主窗口的句柄；
   ②如果没有启动，根据传入的参数，启动该应用并返回该应用的主窗口的句柄；
   ③如果打开失败，抛出异常；
   参数:
   - appName: 绝对路径表示的应用名称
   - mainWndClassName: 应用主窗口的类名(可以通过spy++获取)
   - mainWndName: 应用主窗口名称
   返回值：
   - mainWnd: 主窗口的句柄
   异常：
   - OpenAppException
   '''
   logger.info("开始获取应用：{}".format(appName))
   # 获取应用主窗口
   # 晓黑板和钉钉只要没有主动退出，下一次打开会用默认账号登录，
   # 而微信每次打开都要单独登录
   mainWnd = win32gui.FindWindow(mainWndClassName, mainWndName)
   if mainWnd == 0:   # 主窗口没有被打开
   startApp(appName)    # 启动应用
   time.sleep(cd.generalWaitTime * cd.generalTimeAdjust)   # 等待主窗口显示
   if 'WeChat' in appName:
   logger.info('打开微信登录...')
   loginWindow = win32gui.FindWindow(cd.wxLoginWindowClass, cd.wxLoginWindowName)
   moveWindow(loginWindow, 0, 0)
   mainWnd = wxLogin()
   elif 'DingDing' in appName:
   logger.info('打开钉钉登录...')
   loginWindow = win32gui.FindWindow(cd.ddLoginWindowClass, cd.ddLoginWindowName)
   moveWindow(loginWindow, 0, 0)
   mainWnd = ddLogin()
   else:
   logger.info('打开晓黑板登录...')
   loginWindow = win32gui.FindWindow(cd.xhbLoginWindowClass, cd.xhbLoginWindowName)
   moveWindow(loginWindow, 0, 0)
   mainWnd = xhbLogin()
   logger.debug("返回主窗口句柄：{}".format(mainWnd))
   return mainWnd
   # 粘贴中文
   def myPaste(str):
   pyperclip.copy(str)
   pyautogui.hotkey('ctrl','v')
   # 截图，文件保留为姓名+.jpg
   def getImage(name):
   logger.info("截图： {} 的随申码".format(name))
   im = pyautogui.screenshot(
   imageFilename=name+".jpg",
   region=(cd.imgLeft, cd.imgTop, cd.imgRight, cd.imgBottom)
   )
   # 得到需要点击的位置
   # Return: target_x,target_y
   # x, y: 如果不能识别图片的话，使用
   def getClickPosition(pngName, _x, _y):
   myLocation = pyautogui.locateOnScreen(pngName)
   if myLocation != None:
   logger.debug("找到了图片 {} 的位置，返回图片中央坐标".format(pngName))
   btnPosition = pyautogui.center(myLocation)
   target_x, target_y = btnPosition
   else:
   logger.debug("找不到图片 {} 的位置，使用指定的默认坐标".format(pngName))
   target_x = cd.left + _x
   target_y = cd.top + _y
   return target_x, target_y
   # 找省
   def getSheng(pngName, cl_x, cl_y):
   # 省往下直到找到上海
   pyautogui.mouseDown(x=363, y=246)
   time.sleep(cd.generalWaitTime)
   pyautogui.mouseUp()
   pyautogui.scroll(-100, x=350, y=250)
   target_x, target_y = getClickPosition(pngName, cl_x, cl_y)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 找市
   def getShi(pngName, cl_x, cl_y):
   # 开始找市, 市往下直到找到上海
   pyautogui.mouseDown(x=472,y=246)
   time.sleep(cd.generalWaitTime)
   pyautogui.mouseUp()
   pyautogui.scroll(-150, x=450, y=300)
   target_x, target_y = getClickPosition(pngName, cl_x, cl_y)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 找区
   def getQu(pngName, cl_x, cl_y):
   # 开始找区, 区往下直到找到浦东新区
   pyautogui.mouseDown(x=585,y=246)
   time.sleep(cd.generalWaitTime)
   pyautogui.mouseUp()
   pyautogui.scroll(-150, x=550, y=300)
   target_x, target_y = getClickPosition(pngName, cl_x, cl_y)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 钉钉上传文件
   def uploadFile(name):
   filename = name + '.jpg'
   dlgWindow = win32gui.FindWindow('#32770', '打开')
   comboBoxEx32 = win32gui.FindWindowEx(dlgWindow, None, 'ComboBoxEx32', None)
   comboBox = win32gui.FindWindowEx(comboBoxEx32, None, 'ComboBox', None)
   edit = win32gui.FindWindowEx(comboBox, None, 'Edit', None)
   win32gui.SendMessage(edit, win32con.WM_SETTEXT, None, filename)
   btnOpen = win32gui.FindWindowEx(dlgWindow, None, 'Button', None)
   win32gui.PostMessage(btnOpen, win32con.WM_KEYDOWN, win32con.VK_RETURN, 0)
   win32gui.PostMessage(btnOpen, win32con.WM_KEYUP, win32con.VK_RETURN, 0)
   win32gui.PostMessage(dlgWindow, win32con.WM_CLOSE, 0, 0)
   time.sleep(cd.generalWaitTime)
   confirmWindow = win32gui.FindWindow('PopupFrame', '')
   left, top, right, bottom = win32gui.GetWindowRect(confirmWindow)
   btn_x = abs(right - 70)
   btn_y = abs(bottom - 30)
   pyautogui.click(btn_x, btn_y)
   #win32gui.PostMessage(confirmWindow, win32con.WM_CLOSE, 0, 0)
   # 晓黑板上传文件
   def xhbUploadFile(name):
   filename = name + '.jpg'
   dlgWindow = win32gui.FindWindow('#32770', '打开')
   comboBoxEx32 = win32gui.FindWindowEx(dlgWindow, None, 'ComboBoxEx32', None)
   comboBox = win32gui.FindWindowEx(comboBoxEx32, None, 'ComboBox', None)
   edit = win32gui.FindWindowEx(comboBox, None, 'Edit', None)
   win32gui.SendMessage(edit, win32con.WM_SETTEXT, None, filename)
   btnOpen = win32gui.FindWindowEx(dlgWindow, None, 'Button', None)
   win32gui.PostMessage(btnOpen, win32con.WM_KEYDOWN, win32con.VK_RETURN, 0)
   win32gui.PostMessage(btnOpen, win32con.WM_KEYUP, win32con.VK_RETURN, 0)
   win32gui.PostMessage(dlgWindow, win32con.WM_CLOSE, 0, 0)
   time.sleep(cd.generalWaitTime)
   # 打开微信的随申办，得到每个人的随申码，并保存在当前目录
   def processWxSuishencode(wxWindow):
   logger.info("开始处理从微信获取随申码...")
   # 1.2如果窗口最小化了就把它恢复到正常
   win32gui.ShowWindow(wxWindow,win32con.SW_SHOWNORMAL)
   # 1.3把窗口激活
   win32gui.SetForegroundWindow(wxWindow)
   # 1.4 把微信窗口移动到（0，0），大小调整为800x600
   win32gui.MoveWindow(wxWindow, cd.left, cd.top, cd.width, cd.height, cd.repaint)
   time.sleep(cd.generalWaitTime)
   # 2. 点击小程序面板
   target_x, target_y = getClickPosition(cd.wx_xcxPic, cd.microPg_x, cd.microPg_y)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 2. 点击随申办小程序
   target_x, target_y = getClickPosition(cd.wx_ssbPic, cd.ssb_x, cd.ssb_y)
   pyautogui.click(target_x, target_y)
   # 3.1 打开了随申办的新窗口
   logger.info("打开随申办小程序的窗口...")
   time.sleep(cd.generalWaitTime * cd.generalTimeAdjust)   # 打开小程序还是有点耗时的
   ssbWindow=win32gui.FindWindow(cd.ssbWindowClass, cd.ssbWindowName)
   ssbLeft, ssbTop, ssbRight, ssbBottom = win32gui.GetWindowRect(ssbWindow)
   # 3.2 如果窗口最小化了就把它恢复到正常
   win32gui.ShowWindow(ssbWindow,win32con.SW_SHOWNORMAL)
   # 3.3 把窗口激活
   win32gui.SetForegroundWindow(ssbWindow)
   # 3.4 把随申办窗口移动到（0，0）
   win32gui.MoveWindow(ssbWindow, cd.left, cd.top, abs(ssbRight - ssbLeft), abs(ssbBottom - ssbTop), cd.repaint)
   # 3.5 打开随申码
   logger.info("打开随申码...")
   time.sleep(cd.generalWaitTime * cd.generalTimeAdjust)   # 打开小程序还是有点耗时的，以后可以升级成用文字识别，能识别出“随申码”在跳出循环
   target_x = cd.left + cd.ssm_x
   target_y = cd.top + cd.ssm_y
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime * cd.generalTimeAdjust)  # 打开图形（二维码）比较慢）
   # 截图处理
   getImage(cd.familyList[-1])
   # 3.6 打开亲属随申码主链接，进入亲属随申码列表，第一个是本人
   logger.info("打开亲属随申码清单...")
   target_x = cd.left + cd.ssm_main_link_x
   target_y = cd.top + cd.ssm_main_link_y
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 3.7 循环处理亲属随申码
   for i in range(len(cd.familyList) - 1):
   time.sleep(cd.generalWaitTime)
   target_x = cd.left + cd.ssm_family_x
   target_y = cd.top + cd.ssm_family_start_y + cd.ssm_family_interval_y * i
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime * cd.generalTimeAdjust)
   getImage(cd.familyList[i])
   # 返回亲属随申码列表
   time.sleep(cd.generalWaitTime)
   target_x = cd.left + cd.ssm_main_link_x
   target_y = cd.top + cd.ssm_main_link_y + cd.ssm_family_adjust_y
   pyautogui.click(target_x, target_y)
   # 截图完成后，关闭随申办等窗口，微信窗口保留
   logger.info("关闭【随申码】和【随申办】窗口...")
   win32gui.PostMessage(ssbWindow, win32con.WM_CLOSE, 0, 0)
   win32gui.PostMessage(wxWindow, win32con.WM_CLOSE, 0, 0)
   # 上传到钉钉
   def processDd(ddWindow):
   # 1.  处理钉钉窗口
   # 1.1 找到钉钉的窗口
   ddWindow = win32gui.FindWindow(cd.ddWindowClass, cd.ddWindowName)
   # 1.2 如果窗口最小化了就把它恢复到正常
   win32gui.ShowWindow(ddWindow,win32con.SW_SHOWNORMAL)
   # 1.3 把窗口激活
   win32gui.SetForegroundWindow(ddWindow)
   # 1.4 把钉钉窗口移动到（0，0）
   win32gui.MoveWindow(ddWindow, cd.left, cd.top, cd.ddWidth, cd.ddHeight, cd.repaint)
   time.sleep(cd.generalWaitTime)
   # 1.5 打开工作窗口
   logger.info("找到工作台标签，打开工作窗口")
   target_x = cd.left + 30
   target_y = cd.top + 220
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 1.6 选择孙桥大四班
   #     点击选项
   logger.info("找到组织-班级")
   myLocation = pyautogui.locateOnScreen('img/dingding/dd_orgselected.png')
   if myLocation == None:
   logger.debug("找不到表明【组织-班级】的图片")
   target_x = cd.left + 500
   target_y = cd.top + 53
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   #    点击选中孙桥大四班
   target_x, target_y = getClickPosition('img/dingding/dd_org.png', 500, 202)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 1.7 返回OA工作台首页
   logger.info("返回OA工作台首页")
   target_x, target_y = getClickPosition('img/dingding/dd_oahome.png', 140, 93)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 刷新OA工作台首页
   logger.info("刷新OA工作台首页")
   target_x, target_y = getClickPosition('img/dingding/dd_refresh.png', 187, 52)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime * cd.generalTimeAdjust)
   # 1.8 找每日填表
   #     鼠标下滚
   logger.info("寻找【每日填表】")
   pyautogui.moveTo(150, 150)
   pyautogui.scroll(-400)
   target_x, target_y = getClickPosition('img/dingding/dd_mrsb.png', 550, 225)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime * cd.generalTimeAdjust)
   # 1.9 找到每天要填的表格
   logger.info("寻找每日填表中【每天要填的表格链接】")
   target_x = cd.left + 273
   #target_x = cd.left + 722
   target_y = cd.top + 584
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime * cd.generalTimeAdjust)
   # 2.0 处理填表
   logger.info("开始处理表格，进行自动填表")
   #pyautogui.moveTo(150, 150)
   pyautogui.scroll(-250)
   time.sleep(cd.generalWaitTime)
   # 输入当前日期
   pyautogui.click(240, 246)
   time.sleep(cd.generalWaitTime)
   target_x, target_y = getClickPosition('img/dingding/dd_today.png', 346, 548)
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 输入体温
   strTemp = '36.7'
   pyautogui.click(250, 350)
   pyautogui.press('backspace', presses=5)
   pyautogui.write(strTemp)
   time.sleep(cd.generalWaitTime)
   # 选择健康
   pyautogui.click(214,461)
   # 选择孩子当前所在城市
   pyautogui.scroll(-250)
   time.sleep(cd.generalWaitTime)
   # 激活地区输入框
   pyautogui.click(269, 214)
   time.sleep(cd.generalWaitTime)
   # 找省
   myLocSheng= pyautogui.locateOnScreen('img/dingding/Sheng_SH_selected.png')
   if myLocSheng == None:
   logger.debug("找不到可以定位的省的图片")
   getSheng('img/dingding/Sheng_SH.png', 235, 338)
   getShi('img/dingding/Shi_SH.png', 420, 254)
   getQu('img/dingding/Qu_PD.png', 539, 402)
   else:
   pyautogui.click(269, 214)
   #     # 找市
   #     myLocShi = pyautogui.locateOnScreen('img/Shi_SH_selected.png')
   #     if myLocShi == None:
   #         print('can not find Shi: ' + 'Shi_SH_selected.png')
   #         getShi('img/dingding/Shi_SH.png', 420, 254)
   #         getQu('img/dingding/Qu_PD.png', 539, 402)
   #
   #     # 找区
   #     myLocQu = pyautogui.locateOnScreen('img/dingding/Qu_PD_selected.png')
   #     if myLocQu == None:
   #         print('can not find Qu: ' + 'Qu_PD_selected.png')
   # 孩子及家庭成员是否曾到过或居住在武汉市及周边地区，或境内其他有病例报告的社区
   pyautogui.click(214, 352)
   time.sleep(cd.generalWaitTime)
   # 孩子及家庭成员最近14天，是否前往疫区或国/境外旅行或居住史
   pyautogui.click(214, 494)
   time.sleep(cd.generalWaitTime)
   time.sleep(cd.generalWaitTime)
   pyautogui.scroll(-250)
   time.sleep(cd.generalWaitTime)
   # 孩子最近14天，是否接触来自境外的人员或来自疫情严重地区的人员
   time.sleep(cd.generalWaitTime)
   pyautogui.click(214, 220)
   time.sleep(cd.generalWaitTime)
   time.sleep(cd.generalWaitTime)
   pyautogui.scroll(-80)
   time.sleep(cd.generalWaitTime)
   # 幼儿随申码
   time.sleep(cd.generalWaitTime)
   pyautogui.moveTo(231, 245)
   pyautogui.click()
   time.sleep(cd.generalWaitTime)
   uploadFile(cd.ddMain)
   time.sleep(cd.generalWaitTime)
   pyautogui.scroll(-50)
   time.sleep(cd.generalWaitTime)
   familyList = cd.familyList[:]
   familyList.remove(cd.ddMain)
   # 同住人随申码，同住最多4人，必填2人
   cl_y = 323
   for personName in familyList:
   time.sleep(cd.generalWaitTime)
   pyautogui.moveTo(231, cl_y)
   pyautogui.click()
   time.sleep(cd.generalWaitTime)
   uploadFile(personName)
   time.sleep(cd.generalWaitTime)
   pyautogui.scroll(-50)
   time.sleep(cd.generalWaitTime)
   cl_y += 67
   # 最终提交
   logger.info("最终提交表格")
   time.sleep(cd.generalWaitTime)
   pyautogui.scroll(-80)
   time.sleep(cd.generalWaitTime)
   target_x, target_y = getClickPosition('img/dingding/btnSubmit.png', 273, 605)
   pyautogui.click(target_x, target_y)
   # 2.1 关闭填表
   logger.info("关闭表格选项卡")
   target_x = cd.left + 501
   target_y = cd.top + 90
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 2.2 关闭每日填表
   logger.info("关闭每日填表选项卡")
   target_x = cd.left + 358
   target_y = cd.top + 90
   pyautogui.click(target_x, target_y)
   def processXHB(xhbMainWindow):
   win32gui.SetForegroundWindow(xhbMainWindow)
   left, top, right, bottom = win32gui.GetWindowRect(xhbMainWindow)
   win32gui.MoveWindow(xhbMainWindow, cd.left, cd.top, abs(right-left), abs(bottom-top), cd.repaint)
   time.sleep(cd.generalWaitTime)
   # 把屏幕回滚到最顶端，必定有"今天的消息“
   logger.info("回滚消息屏幕到最顶端")
   pyautogui.moveTo(400,400)
   found = False
   while not found:
   xhbMainScreen = pyautogui.locateOnScreen('img/xiaoheiban/xhb_main_screen_title.png')
   if xhbMainScreen != None:
   found = True
   else:
   pyautogui.scroll(400)
   # 下滚屏幕直到找到需要提交的调查表
   logger.info("下滚消息屏幕找到调查表入口")
   found = False
   while not found:
   xhbMrsbLink = pyautogui.locateOnScreen('img/xiaoheiban/xhb_mrsb_submit.png')
   if xhbMrsbLink != None:
   found = True
   else:
   pyautogui.scroll(-400)
   # 定位到“学校进校人员健康排摸登记表”
   btnPosition = pyautogui.center(xhbMrsbLink)
   target_x, target_y = btnPosition
   pyautogui.click(target_x, target_y)
   time.sleep(cd.generalWaitTime)
   # 1. 输入学号
   pyautogui.click(500, 283)
   pyautogui.hotkey('ctrl', 'a')
   pyautogui.press('delete')
   pyautogui.write('9')
   time.sleep(cd.generalWaitTime)
   # 2. 输入姓名
   pyautogui.click(500, 480)
   pyautogui.hotkey('ctrl', 'a')
   pyautogui.press('delete')
   myPaste(cd.xhbMain)
   time.sleep(cd.generalWaitTime)
   # 滚屏
   pyautogui.scroll(-485)
   time.sleep(cd.generalWaitTime)
   # 3. 选择健康码
   pyautogui.click(483, 270)
   time.sleep(cd.generalWaitTime)
   # 滚屏
   pyautogui.scroll(-325)
   time.sleep(cd.generalWaitTime)
   # 4. 健康码截图
   pyautogui.click(512, 296)
   time.sleep(cd.generalWaitTime)
   xhbUploadFile(cd.xhbMain)
   time.sleep(cd.generalWaitTime)
   # 5. 体温
   pyautogui.click(500, 500)
   pyautogui.hotkey('ctrl', 'a')
   pyautogui.press('delete')
   myPaste('36.5')
   time.sleep(cd.generalWaitTime)
   # 滚屏
   pyautogui.scroll(-510)
   time.sleep(cd.generalWaitTime)
   # 循环把同住人的信息全部更新
   familyList = cd.familyList[:]
   familyList.remove(cd.xhbMain)
   cl_y = 269
   for personName in familyList:
   # 6. 同住人姓名
   pyautogui.click(500, cl_y)
   time.sleep(cd.generalWaitTime)
   pyautogui.hotkey('ctrl', 'a')
   pyautogui.press('delete')
   myPaste(personName)
   time.sleep(cd.generalWaitTime)
   # 7. 同住人健康码
   pyautogui.click(483, 458)
   time.sleep(cd.generalWaitTime)
   # 滚屏
   pyautogui.scroll(-565)
   time.sleep(cd.generalWaitTime)
   # 8. 同住人健康码截图
   pyautogui.click(511, 290)
   time.sleep(cd.generalWaitTime)
   xhbUploadFile(personName)
   time.sleep(cd.generalWaitTime)
   # 9. 同住人体温
   pyautogui.click(500, 500)
   pyautogui.hotkey('ctrl', 'a')
   pyautogui.press('delete')
   myPaste('36.7')
   time.sleep(cd.generalWaitTime)
   # 滚屏
   pyautogui.scroll(-510)
   time.sleep(cd.generalWaitTime)
   # 点击提交
   logger.info("提交调查表")
   target_x, target_y = getClickPosition('img/xiaoheiban/xhb_mrsb_final_submit.png', 846, 594)
   pyautogui.click(target_x, target_y)
   # 回到消息窗口
   pyautogui.click(50, 170)
   if __name__ == '__main__':
   # 日志
   logger = getLogger(cd.basicLogFileName, cd.logFileName, cd.logLevel, cd.logMode)
   # 启动并登录微信
   wxMainWindow = getAppStart(cd.wxAppName, cd.wxWindowClass, cd.wxWindowName)
   # 获取健康码
   processWxSuishencode(wxMainWindow)
   # 启动并登录钉钉
   ddMainWindow = getAppStart(cd.ddAppName, cd.ddWindowClass,  cd.ddWindowName)
   # 钉钉完成提交
   processDd(ddMainWindow)
   #
   # 启动晓黑板并登录晓黑板
   xhbMainWindow = getAppStart(cd.xhbAppName, cd.xhbMainWindowClass,  cd.xhbMainWindowName)
   # 晓黑板完成提交
   processXHB(xhbMainWindow)